Concreteberg blocks London sewer!

Thames Water recently found a record breaking 100 ton Concreteberg blocking a London sewer. The mass stretches 100 meters resulting in a estimated cleanup bill of £150,000. 

Thames Water Operations Manager stated “Normally blockages are caused by fat, oil and wet wipes building up in the sewer, but unfortunately in this case it’s rock-hard concrete. . . It’s in there and set to the Victorian brickwork, so we need to chip away at it to get it removed. . . This is not the first time damage has been caused by people pouring concrete into our sewers but it’s certainly the worst we’ve seen.”

An investigation is under way to identify the source and recover costs.

Its not just us here in the UK surprised by this finding (USA Today). 

Are You Conforming?

Dealing with concrete wash water correctly should be an important part of any site plan. And equally important is that the equipment you are using is properly tested.

Read More »

Understanding pH

pH is a measure of how acidic a solution is. For dilute solutions the pH scale ranges from pH 0 to pH 14, pH seven is in the middle and is therefore the neutral point; pH’s less than 7 are acidic and pH’s greater than 7 are alkaline.

Read More »

Danger of High pH Wash Water

The chemical reaction which causes fresh concrete to slowly stiffen and harden is quite complicated. A by-product of this process is the creation of a highly alkaline chemical that has a natural pH in excess of 12. Drinking water, by comparison, has a pH of around 6.5 to 7.

Read More »